Volume/Tone Push Button - PSC Magellan 8100 Guía De Referencia Rápida

Volume/Tone Push Button

The Volume/Tone Push Button also performs multiple functions depending
upon the duration of time it is pressed:
PRESS
DURATION
Momentary
(when scanner is
asleep)
Momentary
(when scanner is
awake)
Hold, then
release when the
beeper sounds
4 Seconds
8 Seconds
a. Diagnostics Mode is meant for use by trained systems support personnel. Users
b. Users should not perform scanner resets except under the direction of trained sys-
4
Table 3. Volume/Tone Push Button Functions
FUNCTION
Wakes scanner from
Sleep Mode
Increments volume
Increments tone
Scanner Diagnostics
a
Mode
Resets Scanner
should not need to initiate this function under normal circumstances.
tems support personnel.
COMMENT
Alternatively, the scanner can be awakened
by:
- Moving an object through the scan zone.
- A weight change on the scale.
- Scanning with an attached auxiliary scanner.
Press the push button momentarily to
increase speaker volume. When the loudest
volume is reached, a repeated press of the
push button cycles volume back to the lowest
setting, then volume increases on subsequent
press(es). Five volume levels are available.
Press the push button for approximately 2 sec-
onds, then release. Each time this is done, the
beeper will sound at one of three tones. Stop
when the desired tone (high, medium or low)
is sounded.
This mode allows system support personnel to
troubleshoot problems with the scanner. Press
the button for eight seconds or cycle power to
exit Scanner Diagnostics Mode and reset the
scanner.
Only system support personnel should per-
b
form a reset.
®
Magellan 8100/8200