Controls And Indicators - PSC VS800 Guía De Referencia Rápida

Controls and Indicators

Visual Indicator
The Light Emitting Diode (LED) provides a visual indicator of the various sys-
tem operations:
•
•
•
•
Audible Indicator
A Speaker produces an audible indicator of scanner operation:
•
•
•
Changing The
right to cycle through the three possible vol-
ume settings. For permanent volume
change, see the Duet/VS800 Programming
Guide.
Switch Button
Pressing the Switch momentarily "wakes up" the scanner if it is in the Sleep
Mode.
Quick Reference Guide
On Dim – Scanner is operational and ready to scan.
Flashes once brightly after reading a bar code – indicates a "good"
scan. Usually accompanied by a single tone from the speaker.
Flashes from dim to bright once per second – indicates the scanner is in
the Sleep Mode due to an extended time of inactivity.
Flashes repeatedly accompanied by a series of tones – indicates a fail-
ure has occurred. If the scanner exhibits this behavior or behaves errat-
ically, contact your service personnel.
Normal – A single tone indicates the scanner read a "good" bar code.
Passed Selftest – A series of four tones when power is first applied indi-
cates the scanner has passed the Selftest.
Error Tone – A series of tones sound to alert the operator of a possible
system or component failure. (Refer to Troubleshooting section).
Volume—Scan the bar code at
Increment Volume
3