Disposal Of The Product; Ec Declaration Of Conformity - Nice MOTB Instrucciones Y Advertencias

DISPOSAL OF THE PRODUCT

This product constitutes an integral part of the automation system, there-
fore it must be disposed of along with it.
As in installation, also at the end of product lifetime, the disassembly and scrap-
ping operations must be performed by qualified personnel.
This product is made up of different types of material, some of which can be
recycled while others must be disposed of. Seek information on the recycling
and disposal systems envisaged by the local regulations in your area for this
product category.
Caution! – some parts of the product may contain pollutant or hazardous sub-
stances which, if disposed of into the environment, may cause serious damage
to the environment or physical health.
As indicated by the symbol on the left, disposal of this product in
domestic waste is strictly prohibited. Separate the waste into cat-
egories for disposal, according to the methods envisaged by cur-
rent legislation in your area, or return the product to the retailer
when purchasing a new version.
Caution! – Local legislation may envisage serious fines in the event of abusive
disposal of this product.
PRODUCT TECHNICAL FEATURES
RECOMMENDATIONS: • All technical features refer to a room temperature of
20°C (± 5°C). • Nice S.p.a. reserves the right to modify the product at any time
it deems necessary, however maintaining the same functionality and destination
of use.
I Type: control device
I Technology use: "Bluebus" system
I Lighting: red/green
I Length of the connection cable: refer to the control unit instruction
manual
10 – English
I Power input: the device must only be connected to the Nice "Bluebus" sys-
tem, through which it is powered and communicates with the control unit
I Absorbed current: 1.5 bluebus unit
I Memory capacity: 1 BM1000 (contains a maximum of 255 combinations)
I Insulation: class III
I Container protection rating: IP 54
I Working temperature: from -20 °C to +55 °C
I Use in acidic, saline or potentially explosive environment: No
I Assembly: Vertical on the wall
I Dimensions (mm): 80 x 70 x 30 h
I Weight: 240 g

EC DECLARATION OF CONFORMITY

Note - The content of this declaration corresponds with that declared in the latest revision avail-
abl, of the official document deposited in the Nice Spa. head offices before printing this manual.
This text has been re-adapted for editorial reasons.
Number: 301/MOTB
The undersigned Lauro Buoro in the quality of Managing Director, declares under
his own liability that the product:
Manufacturer's name: NICE s.p.a.
Address: Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
Type: Selettore digitale a bus
Models: MOTB
Accessories:
Is in compliance with that envisioned by the following European Community Directives:
• 2004/108/EEC (ex 89/336/EEC Directive) 2004/108/CE DIRECTIVE OF THE
EUROPEAN PARLIAMENT AND COUNCIL dated 15 December 2004 concern-
ing the harmonisation of the legislations of the Member States relative to elec-
tromagnetic compatibility and which repeals the 89/336/EEC Directive.
According to the following harmonised Standards: EN 61000-6-2:2005; EN
61000-6-3:2007
Oderzo, 16 October 2008
Revision: 0
Lauro Buoro
(Managing Director)