Using The Advanced Features Of Jabra Bt800 - Jabra BT800 Manual Del Usuario

4. Volume control and mute function
•
Your Jabra BT800 headset features an
automatic volume control that adjusts the
volume depending on ambient noise level.
You can manually adjust the volume using
the volume jog wheel see Fig 5
•
During a conversation, press the mute button
to mute the call. You un-mute by adjusting
the volume level on the volume jog wheel or
by tapping on the mute button see Fig 6
4

Using the advanced features of Jabra BT800

Your Jabra BT800 offers you a selection of more advanced settings and features, which
you can operate through the menu in the headset.
1. Call waiting and placing a call on hold
To put a call on hold during one conversation to answer a waiting call.
•
Press once on the answer button to put active call on hold and answer
the waiting call.
•
Tap on the end button to end active conversation
•
Swap between the two calls with a press on the answer button
2. Access the menu
From the menu, you can adjust your settings according to
your preferences. See Fig 7
•
Access the menu when your are not receiving or
making a call with a press on the mute / menu
button
•
Use the jog wheel to navigate the menu
•
Select or activate a menu item with a tap on the
answer button
•
Exit / go back in the menu with a tap on the end button
6
You can choose between "call list" and "settings" inside the menu. The menu structure will
depend on your mobile phone, as some phones will not support all features.
3. Accessing latest calls via the headset
•
Access the menu and use the jog wheel to select "call list".
Fig. 5
•
You will see a list of the latest incoming calls.
•
Use jog wheel to select the desired number and tap the answer button to make
the call.
4. Adjust your settings
Fig. 6
Choose "settings", to move up or down in the menu to adjust or select:
Ring tones
Ring type
Language
Select your personal ringing tone
•
Access the menu – turn the jog wheel down and select "settings" and then
"ringing tones" where you can select your preference
Adjust ring type
•
Select "ring type" and choose between "normal" or "silent" ring tone
•
Once you have selected "ring type" you can choose to have the call vibrate feature
"on" or "off"
NOTE: The ringing tone has been specified to be heard clearly yet comfortably when
you are wearing the headset.
Adjust light
•
You can decide if you want the LED in the mute button at the center of the jog
wheel, to flash or not. When activated, the LED will flash every second during a
conversation or every three seconds when the headset is in standby mode.
Bluetooth connections
•
Choose "list" to scroll through the list of your paired devices and select the one
you want to make active
•
You can also "add new device" from the menu. The functionality is the same as
setting the headset in pairing mode from the pairing stylus switch
Fig. 7
Light
Bluetooth connection
( )
7