Assembly And Grip; Blower Mode; Vacuum Mode; Fuel Supply - Truper SOPLA-26T Instructivo

Assembly and Grip

Blower Mode

• Align the nozzle slot (A) with the connection pinion
shaft (B).
• Push the nozzle as indicated with the arrows and turn it
counterclockwise to lock it into position.
• The machine while in blower mode shall be held by the
handle, either right-handed or left-handed.

Fuel Supply

Fuel Supply
• Follow the safety standards for fuel handling (page 5).
• Clean the surface around the fuel tank cap to avoid
contamination.
• Slowly loosen the fuel tank cap.
• Using care to prevent spills, pour the fuel mix into the
CAUTION
tank. Follow the fuel specifications
(page 3).
• Immediately set back the fuel tank cap and hand
tighten.
• Clean all the spilled fuel.
When the motor is new, smoke
CAUTION
emissions are a normal occurrence after being used for
the first time .

Vacuum Mode

• To join the vacuuming extensions, align the rear extension slot
with the rear extension notch (A).
• Push the extensions following the arrows direction until the
pinion shaft in the rear extension is locked in the notch (B).
• Using a screwdriver, loosen the screw in the collapsible flap (C).
• Open the collapsible flap and align the slot in the rear
extension (D) with the pinion shaft in the turbine housing.
• Push the extension and turn in a clockwise direction until
interlocking into position.
• Align the elbow slot (E) with the connection pinion shaft (F).
• Push the elbow and turn counterclockwise to lock it into
D
F
C
E
B
A
position.
• Always hold the handle with your left hand and
the auxiliary handle with the right hand while in
vacuum mode.
WARNING Otherwise, your body will
be exposed to burns when making
contact with the motor exhaust.
B
A
7
ENGLISH