Tabla de contenido
Idiomas disponibles
Idiomas disponibles
When you
receive a
call
or
Identifying
the caller
II
T2030
II
T2035
Receiving Calls
The tones used to alert you to an incoming call may
vary, depending on how your radio is programmed and
the type of network you are using.
Both types of alert tone are illustrated below, alongside
instructions for answering the different types of incoming
call.
Tone:
Two tones
A single tone
A ringing tone
If the call is from a location that is programmed as a
preset for your radio, then the radio will display the
preset ID as follows:
The appropriate preset key indicator will light.
The caller's preset number will show on the display.
Additional information may be displayed on the T2035
If the call is:
From within your fleet
From outside your fleet
From a telephone
Unidentifiable
To Answer:
This is a Direct Call. When the GO
indicator lights, lift the microphone
and respond to your caller.
This is a Request Call. Either:
1 Lift the microphone off-hook.
• Wait while your radio sets up the call.
• Respond when the WAIT indicator
goes out and the GO indicator lights,
or
2 Press the Clear (
the call.
The T2030/35
the caller's fleet ID
.1.
.2. or .3.
.4.
) key to reject
II:
II
displays:
13
English
Tabla de contenido
