Handling The Machine - Kyocera FSC1020 MFP Manual Del Usuario

Handling the Machine

R WARNING:
• Wait at least 30 minutes after disconnecting the power plug before re-
moving the Transfer Unit.
R CAUTION:
• Before moving the machine, unplug the power cord from the wall outlet. If
the cord is unplugged abruptly, it could become damaged. Damaged plugs
or cords can cause an electrical or fire hazard.
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will
not be damaged under the machine.
• The machine weighs approximately 30 kg (66.2 lb.). When moving the ma-
chine, use the inset grips on both sides, and lift slowly in pairs. The machine
will break or cause injury if dropped.
• When moving the machine, use the inset grips on both sides. The machine
will break or cause injury if dropped.
• When moving the machine after use, do not take out any of the toners, nor
the waste toner bottle to prevent toner spill inside the machine.
• Do not connect the Ethernet port of the machine to a network that may sup-
ply excess voltage, such as a telephone line. Doing so may result in fire or
electric shock.
• Be careful not to trap your fingers when opening or closing the top cover.
A-6