Application - Honeywell HX 85 Montaje Y Funcionamiento

Application

For your information
Technical terms are explained in the glossary (Page 68).
Application
The Module HX 85 has two different operating modes that can be set
either as a sensor or Lynx alarm system, depending on the
application. In all, five digital inputs are available. Operating mode 1
allows the processing of five digital inputs, and operating mode 2
allows communication with ADEMCO alarm systems (Lynx) via the X-
10 interface. The respective operating mode is set via DIP switches.
Operating mode 2 is only possible with HCM 200D.
The status of a digital input is indicated via YES-NO in the HCM 200D.
Each state change of a digital input can be assigned a corresponding
lifestyle at the Hometronic Manager HCM 200D.
38