Description; Front Panel - Optimus M130 Instrucciones De Seguridad

2. DESCRIPTION

2.1. Front panel

1. Monitor speaker.
You can listen to 8 zone audio output through the built-in monitor speaker.
2. Channel selection button.
Press this button to select one of the 8 audio signals from the matrix.
3. Monitor LED channel indicator.
The LED displays the current channel selected.
4. Volume control for remote microphone M132M.
Adjust volume up to four remote microphones M132M connected to each of the 8 zones. In the
LED display will show "R" when the microphone M132M is giving a warning to a zone.
5. Volume controller for emergency microphone.
Adjust the volume level for each emergency zone. The emergency microphone is connected to
the MIC IN plug type XLR located on the rear panel of the matrix. In the LED display will show
"P" while the emergency microphone is emitting a warning.
6. Keyboard manual for emergency activation.
Press desired buttons to select the desired output when you need to send an emergency
message by a microphone.
7. Name tags for each of the 8 channels.
Type the name of each audio channel.
8. Power switch.
It's used to turn on or off the equipment. The red light indicates the equipment is on.
M130 Version 1.0
M130
8x8 Audio Matrix
Page 5 of 23