Tabla de contenido
If the anchor has been subjected to fall arrest forces, remove it from service immediately.
IN THE EVENT OF A FALL: The responsible party must have a rescue plan and the ability to implement a rescue. Tolerable suspension time in a full body
harness is limited, so a prompt rescue is critical.
5. SPECIFICATIONS
See Table 1 in Appendix A.
6.
MAINTENANCE
AND
STORAGE
Clean the anchor with a mild detergent solution. Store indoors. Avoid chemical vapors, moisture, and physical damage. Apply a light coat of silicone spray
lubricant to the hand‐clamp threads.
7. INSPECTION PROCEDURE
Prior to each use, the user must inspect the system for any physical damage, wear, corrosion, or missing parts. The Window/Door Jamb Anchor must be
formally inspected by a competent person other than the user at least annually.
If the anchor has been subjected to a fall arrest load, remove it from service.
Inspect for:
1. Ensure the unit is straight and that the sliding leg does not bind on the main body.
2. Cracks
3. Fractures
4. Bent or broken plate or d‐ring
5. Corrosion
6. Inspect the hand clamp for deformities, dirt, grease, paint or other debris.
Record inspection results on the Inspection Record found in Appendix B or on another suitable record.
8. LABELS
The following labels must be present and legible.
4
051514
Tabla de contenido
