Functional Description - DeVilbiss CARLISLE SRiPro Lite Micro Manual De Mantenimiento

FUNCTIONAL DESCRIPTION

The SRiPro Lite spray gun is a professional quality gun designed with both High Efficiency or high volume, low
pressure (HVLP) technology. HVLP technology reduces overspray and limits air cap pressure to 0.7 bar [10 psi],
(complies with rules issued by SCAQMD and other air quality authorities). High Efficiency technology, when
tested under recommended conditions, has been found to exceed 65% transfer efficiency.
IMPORTANT: This spraygun is suitable for use with both waterbased and solvent based coating materials. The
gun is not designed for use with highly corrosive and/or abrasive materials and if used with such materials it
must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt
regarding the suitability of a specific material, contact your DeVilbiss Distributor or DeVilbiss direct.
SPECIFICATIONS
AIR INLET PRESSURES
Max Static Air Input Pressure
P1 =
Gun Air Inlet Pressure for High Efficiency and HVLP setups, with gun
triggered.
Vibration Level:
Sound Power Level:
Sound Pressure Level:
ENVIRONMENTAL
Max Ambient Operating Temperature
MATERIALS OF CONSTRUCTION
Gun Body, Air Cap Retaining Ring, Knobs
Air Cap
Fluid Tip, Fluid Needle and Trigger Stud
Springs, Clips, Screws
Seals, Gaskets
Trigger
Air Inlet, Body Bushing, Spreader Valve Body, Air Valve Nut
Air Valve Assembly
CONNECTIONS
Air Inlet Size
Fluid Inlet Size
WEIGHT
GUN ONLY
DIMENSIONS
L x H x W mm
SB-2-512 R1
12 bar [175 psi]
2.0 bar [29 psi]
<2.5 m/s²
Available on request
Available on request
104° F [40° C]
Anodized Aluminium
Nickel plated brass
Stainless Steel
Stainless Steel
Solvent resistant
Chrome plated steel
Chrome plated brass
Stainless Steel, HDPE
Universal 1/4" BSP and 1/4" NPS male
7/16" - 14 UNC
395g
135 x 163 x 18
2/24
EN
www.carlisleft.com