DeVilbiss CARLISLE SRiPro Lite Micro Manual De Mantenimiento página 16

When removing air cap from retaining ring, do not remove the ring seat from the retaining ring.
Damage to the parts may occur. Simply wipe parts clean and reassemble with new or clean air cap.
FLUID FAULTS
Slow fluid leak from fluid tip and
needle seat.
Major fluid leak or fluid jetting
from fluid tip and needle seat.
Slow fluid leak from needle
packing.
SB-2-512 R1
CAUSE
Fluid tip internal seat scored
damaged or worn.
Fluid needle external profile
damaged or worn.
Contamination on needle or tip
mating surfaces preventing good
seal.
Incorrect fluid tip for fluid needle
fitted to gun.
Sluggish needle.
Tight packing nut.
Contamination on needle or tip
mating surfaces preventing good
seal.
Incorrect fluid tip for fluid needle
fitted to gun.
Fluid needle packing worn or
loose.
16/24
CORRECTION
Replace.
Replace.
Thoroughy clean.
Check tip/needle selection chart
and fit correct item.
Lubricate packing. (GL-1)
Adjust.
Remove tip and needle and
thoroughly clean.
Check tip/needle selection chart
and fit correct item.
Tighten or replace as necessary.
www.carlisleft.com
EN