Kenmore 116.39050 Manual De Uso Y Cuidado página 22

[
CLOG REMOVAL
NOZZLE
Always follow all safety precautions when
performing maintenance to the vacuum
cleaner,,
WARNRNG
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the
vacuum cleaner. Failure to do so
could result in electrical shock or
personal injury from the vacuum
cleaner suddenly starting.
1, Using a flat screwdriver or small coin pry
gently between the cover and the nozzle to
access the clean-out port,
__'Flat
2, Remove any debris or build-up.
3. Reinstall cover, You should hear a
noticeable click when the cover snaps into
place,,
DUST CUP
Dust Cup
Release
to Press the release button on
the side of the
dust cup,
2. While pressing
the release but-
ton rotate the top
of the dust cup
counterclockwise,
3, Lift off dust
cup lid,
4o Remove clog.
To Replace:
1, Align the slot on the dust cup lid with the
short slot on the dust cup,,
2, Rotate dust cup lid clockwise until it locks
in place, The slot on the dust cup lid should
align with the long slot on the dust cup,
22