Releasing The Handte - Kenmore 116.39050 Manual De Uso Y Cuidado

[
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand,
]
RELEASING THE HANDLE t
Note: The agitator does not rotate when the
vacuum cleaner is in the upright position
\
I
OFFIFLOOR/CARPET SWITCH 1
To start the vacuum cleaner, slide the
OFFtFLOOR/CARPET switch from the OFF
position to the FLOOR or CARPET position
d CAUTION
Refer to your carpet manufacturers
cleaning recommendations. Some
more delicate carpets may require that
they be vacuumed with the agitator
turned off, to prevent carpet damage.
To stop the vacuum cleaner, slide the
ON/FLOORICARPET switch to the OFF
position,
CAUTmON
Do not allow vacuum cleaner to
remain in one spot for any length of
time when the agitator is turning.
Damage to carpet may occur.
OFF - turns both OFF/FLOOR/
suction and CARPET
brush motors off
FLOOR - turns Selector
on the suction
motor only In
this position the
agitator does
not revolve
Use this setting for cleaning hardwood and
tile floors and when any attachments
(tools) are used
CARPET - turns on both the suction and the
brush motors.
Note: The agitator does not rotate when the
vacuum cleaner is in the upright position.
10