Design Features - Rockford Fosgate PRIME R250-4 Manual Del Usaurio

Design Features

Power LED
Power LED illuminates blue when
the unit is turned on.
RCA Input Jacks
The industry standard RCA jacks provide an easy connection
for signal level input. They are nickel-plated to resist the signal
degradation caused by corrosion. The Pass-Thru provides a con-
venient source for daisy-chaining an additional amplifier without
running an extra set of RCA cables from the front of the vehicle to
the rear amplifier location.
4
Gain Control
The input gain control is preset to match the output
of most source units.
PUNCH BASS
0dB +6dB +12dB
100
75
FRONT FREQ.
POWER
LP (Low Pass Only)
GND
Power/REM Terminals
The power and ground are nickel-plated clamp wire connectors and will
accommodate 4 AWG #8 (up to 1/2") spade or ring style connectors.
The nickel-plated clamp wire connector and will accommodate 8 AWG
#8 (up to 3/8") spade or ring style connectors.(This terminal is used to
remotely turn-on and turn-off the amplifier when +12V DC is applied.)
LP – AP – HP-80Hz
175 5 7
225 3
50 250 1 11
FRONT
Hz
GAIN
LEFT
RIGHT
REM B+
INP
9
FRONT
FUSE
20A 20