TaoTronics TT-BA07 Manual Del Usuario página 6

LED Indicators
LED Indicator Status
Charging
Solid Red LED
LED Off Fully charged
Pairing in Transmitter
Flashing Red
/ Receiver Mode
and Blue
Low battery
Flashing Red
Solid Blue LED Successfully paired
Flashing Blue
Powered on but not paired
(Every 2 Seconds)
with Bluetooth devices
Note:
• For first time use, once powered on, the adapter will
automatically enter pairing mode. Please follow the
instructions below on how to pair.
How to Use
Charging
1. Connect the micro-USB end of the charging cable to the
charging port of the Bluetooth adapter.
2. Plug the USB end of the charging cable to a USB charging
port or any active USB port.
3. The LED indicator will turn red when charging. It will
automatically turn off when the device is fully charged.
Note:
• You can use the adapter while it is charging.
• We recommend charging the unit for at least 2 hours before
using it for the rst time.
Pairing
Pair in TX mode:
1. Turn on the Bluetooth on your device; make sure the adapter
and the device are placed within a 3 feet / 1 meter range.
2. Press and hold the Power Button for 5 seconds (LED indicator
ashes blue slowly) and tap twice to enter pairing mode (LED
07/08