Before You Begin; Helpful Hints - Whale Easi-Slide Instalacion E Instrucciones

Before you begin

• (Figure 1) Ensure your caravan,
motorhome or panel van is on a
level surface and secured.
Figure 2.
Socket Installation
4
• ( 1) Ensure you have enough free wall space for the installation including enough clearance for
the Whale Easi-Slide Lid when installing and open.
4
• ( 2) Use Socket Mounting Profile on page 39 as your cutting template and fix to vehicle wall
using masking tape.
4
• ( 8) Masking tape should be fitted around the outside of the socket to protect the grooves.
4
• ( 11) Ensure the rear sealing face of the socket is clean and free from any dirt or debris to
ensure a good seal.
4
• ( 13) Tighten screws evenly to avoid twisting the socket. Follow order shown.
4
• ( 14) In the instance that wall battens do not exist behind the socket cut out, use flat nuts to
secure screws in place.
4
• ( 15) When removing sealant from around the socket when installed, also clean the grooves to
ensure protection and smooth use of socket.

Helpful Hints

• If the cover does not move freely when installed, remove it and ensure guide rails are free from
sealant and debris.
• If your socket appears to be twisted when installed, slightly adjust the sealing screws.
• (Figure 2) Ensure you have enough free wall space
for the installation including enough clearance for the
Whale Easi-Slide Lid when installing and open.
• These products are not designed for any other
purpose than for supplying fresh water to a caravan,
or other recreational vehicle.
• Always disconnect power sources before installing or
making connections.
• With all applications, it is important that a system of
safe working practice is applied to installation, use
and maintenance.
• Always ensure water system is drained before
commencing any work.
4
( 1 - 17)
Figure 1.
-3-