Uniteck UNICHARGE Manual Del Usuario página 16

EN
INSTALLATION
Protected against humidity and rain (IP65), UNICHARGE can be used in all the most humid places such as
hangars, garden sheds etc.
Using the 4 fixing holes, UNICHARGE 4.12 and 8.12 can be fixed to the walls easily.
CONNECTION
Before making any connections, please check the following :
For open batteries, check the level of the electrolyte. If necessary, top it up with distilled or deionized water.

Connect the red clamp to the positive terminal of your battery (marked + or P).

Connect the black clamp to the negative terminal of your battery (identified - or N).
Unicharge 1,15.12

Select MODE. (See control panel part)

Plug the Unicharge into the wall outlet/socket.
Unicharge 4.12 / 8.12

Plug the Unicharge into the wall outlet/Socket.

Select MODE. (See control panel part)
Model 4.12 and 8.12: to validate your selection, wait 5 seconds. The selected mode will then be
initiated.

When charging is completed, the "Charge" LED lights green. If the "Charge" LED is off, check your
connections.
To disconnect, follow the reverse order.
16/36
www.uniteck.fr