Pioneer S-DV424 Guia De Instalacion página 4

Standard surround
5-spot setup
This is a standard multichannel surround soundspeaker
setup for optimal 5.1 channel home theatre sound.
Front left
Surround
left
1
Detach the surround speakers from the
front speakers.
To remove, turn the surround speaker so that the
arrow at its base lines up with the DETACH POSITION
(%) on the top of the front speaker. Once aligned, the
surround speaker can be removed easily by gently
lifting it upwards.
Caution
To prevent accidents when in use, make sure the
surround speaker is secure by turning it so the
at the base of the speaker is not in the UNLOCK AREA.
2
Attach the front speaker covers and
surround speaker bases.
Line up the holes with the spurs on the cover or
base as shown below. Press in firmly.
4
En
Center
Front right
Subwoofer
Listening position
Surround
right
2
1
3
Attach the non-slip pads to the base
of each of the center and surround
speakers.
Use the adhesive to attach 4 pads to the base of
each speaker.
4
Connect the speaker system.
Refer to the setup guide provided to connect the
speakers properly. After connecting the speaker
wires, thread the front speaker cord through
the outlet on the base of the speaker stand as
shown below. Make sure to use a stable
surface when doing this, and lay the speakers
flat on their side.
arrow
To keep the stand steady when upright, tuck the
cord into the groove on the bottom as shown below.
Refer to the setup guide provided for optimal
surround sound placement.