Oil Cooling; Adjusting The Seeding Depth - GASPARDO PINA Empleo Y Mantenimiento

Tabla de contenido
NOTES:
- For the distribution of small seeds, reduce the values in table
6 by 30%.
- In the first metres of the work, check that the seeds are
being placed correctly in the furrow. If the seeds are being
placed outside the furrow, reduce the rpm of the fan.
It is strictly forbidden to touch act on the dowel (C, Fig. 50) for
any reason, as this would unset the system and could lead to
the motor or pump breaking.
Remember furthermore that at the successive start-up of the
system, with cold oil and the position of the regulator untouched,
there will be an initial increase in the blower speed which, once
the right working temperature has been reached, will return to
that set.

OIL COOLING

When using a dependent system it is important to check the
capacity of the tractor's oil tank and whether the cooling system
is sufficient. If necessary have an oil cooler or a larger tank
installed on the tractor by the dealer: the ratio between the volu-
me of oil in the system and the capacity of the tank should be
approximately 1:2.
- Always keep oils and grease out of reach of children.
- Always read warnings and precautions indicated on the
containers carefully.
- Avoid skin-contact.
- After use wash the equipment thoroughly.
- Treat the used oils and polluting liquids in conformity with the
laws in force.
The Manufacturer declines all responsibility due to negligence
and non-observance of these rules.

3.5 ADJUSTING THE SEEDING DEPTH

To obtain a good level at which sprouts come out, the seed needs
to be placed at the right depth into the seeding bed.
The planting depth is adjusted individually for each element, by
using the nut (B, Fig. 51) to regulate the compression springs (A,
Fig. 51). Depending on the type of the type of soil, either increase
or decrease the compression of the spring in order to determine
the correct working depth.
Coulters that work in the tracks of the seeder or the tractor
should be set to greater pressure.
cod. G19503360
WARNING
ATTENTION
USE AND MAINTENANCE
fig. 51
g
ENGLISH
B
A
61
Tabla de contenido
loading

Tabla de contenido