Cleaning And Maintenance - Lanaform Dehumidifier Manual Del Usuario

B. DIRECTING THE AIR VENT
• When the dehumidifier or air purification functions are running, you may set the direction of the air vent. Press the
Swing key (15) once. The grid will rotate 90°. Press the Swing key (15) a second time, the grid will remain in the desired
position.
C. TIMER FUNCTION
This function enables you to program the automatic startup (if the appliance is off) or shutdown (if the appliance is on)
of the appliance.
Programming automatic shutdown
When the appliance is running, press the Timer key (12) until the LCD screen displays the intended number of hours.
The selected number of hours will flash for a few seconds. The LCD screen will then display the degree of humidity and
remaining time before the appliance shuts down. «OFF» will appear below the time.
Programming automatic starts
When the appliance is off, press the Timer key (12) until the LCD screen displays the intended number of hours. The
selected number of hours will flash for a few seconds. The LCD screen will then display the degree of humidity in the
room and remaining time before the appliance starts. «ON» will appear above the time.
D. AIR PURIFICATION
• The appliance is equipped with an air purification function. To activate this function, start by selecting the Power key
(10). Then press the Mode key (11) until the icon (20) appears.
• You may then select the level of operation using the Humidity key (13).
• You can also select the direction of the air vent as described above.
E. IONIZATION
You may activate the air ionization function in dehumidifier or purification mode. Ionization provides many benefits:
improved well-being, improved air quality, etc.
To activate the function, press on the Ionizer key (16) on the control panel.
F. BLOCKING OF THE CONTROL PANEL
You may lock the control panel to avoid damage to the appliance due to use by others. Hold the Mode key (11) in for 3
seconds. To release the control panel, hold the Mode key (11) on the control panel in for 3 seconds again.
G. SELF CLEANING FUNCTION
After a long period of inactivity, the appliance may trigger an internal cleaning sequence to remove all water and mould
in the dehumidifier.
Press the Drying key (14) to trigger this sequence.
The appliance will then run for 1 hour thanks to the fan (the compressor will not operate during this program). You can
stop this program by pressing on either Power (10) to turn off the appliance or on the Drying key (14). The appliance will
then return to the previous program.

CLEANING AND MAINTENANCE

Make sure you turn off and unplug your appliance before cleaning.
Never use detergents to clean the dehumidifier.
Dehumidifi er
EN
7