Lucent Technologies LambdaUnite Manual De Seguridad página 13

Summary of important
safety instructions
...............................................................................................................................................................................................................................................................
365-374-138A4
Issue 1, November 2003
• Non-system software is used at one's own risk. The use/installation
of non-system software can adversely affect the normal functioning
of the system.
• Only use tested and virus-free data carriers (floppy disks, streamer
tapes, ...).
Especially observe the following safety instructions, they are of
particular importance for LambdaUnite
• This equipment is to be installed only in Restricted Access Areas in
business and customer premises.
Applications in accordance with Articles 110-16, 110-17 and
110-18 of the National Electrical Code, ANSI/NFPA No. 70. Other
installations exempt from the enforcement of the National
Electrical Code may be engineered according to the accepted
practices of the local telecommunications utility.
• This product should only be operated from the type of power source
indicated on the marking label.
• This equipment must be provided with a readily accessible
disconnect device as part of the building installation.
• Disconnect up to four (4) power supply connections when
removing power from the system.
• Installation must include an independent frame ground drop to the
building ground. Refer to the LambdaUnite
Guide.
• For information on proper mounting instructions, consult the
®
LambdaUnite MSS Installation Guide.
• Install only equipment identified in the LambdaUnite
Installation Guide provided with this product. Use of other
equipment may result in improper connection of circuitry leading to
fire or injury to persons.
• To reduce the risk of electrical shock, do not disassemble this
product. Installation and service should be performed by trained
personnel only. Opening or removing covers and/or circuit boards
may expose you to dangerous voltages or other risks. Incorrect re-
assembly can cause electrical shock when the unit is subsequently
used.
• Slots and openings in this product are provided for ventilation. To
protect the product from overheating, these openings must not be
blocked or covered. This product should not be placed in a built-in
installation unless proper ventilation is provided.
• Never push objects of any kind into this product through slots as
they may touch dangerous voltage points or short-out parts that
could result in a risk of fire or electrical shock. Never spill liquids
of any kind on the product.
EN: Safety guide
®
MSS systems:
®
MSS Installation
®
MSS
1 - 7