A
GENERAL WARNINGS
Important pre-
To ensure operator safety and to protect the pump from
cautions
potential damage, workers must be fully acquainted with
this instruction manual before performing any operation.
Symbols used
The following symbols will be used throughout the manual
to highlight safety information and precautions of particular
in the manual
importance:
WARNING
This symbol indicates safe working practices for
operators and/or potentially exposed persons.
NOTICE
This symbol indicates that there is risk of damage to
the equipment and/or its components.
NOTE
This symbol indicates useful information.
Manual preser-
This manual should be complete and legible throughout.
vation
It should remain available to end users and specialist in-
stallation and maintenance technicians for consultation at
any time.
Reproduction
All reproduction rights are reserved by Graco Inc. The text
rights
cannot be reprinted without written permission
B
SAFETY INSTRUCTIONS
B.1
SAFETY WARNINGS
Mains -
Before installation, make sure that the electric power supply
preliminary
network is fit ed with a suitable earth-line and complies with
checks before
the regulations in force.
installation
WARNING
ELECTRIC SHOCK HAZARD
You must avoid any contact between the electrical power
supply and the fluid th t needs to be pumped.
Maintenance
Before any checks or maintenance work are carried out,
control
switch the system's power off by disconnecting the plug
from the socket.
WARNING
EQUIPMENT MISUSE HAZARD
It is strictly forbidden to support or transport the system us-
ing a power supply cable.
It is strictly forbidden to support or transport the system us-
ing a suction or outlet pipe.
C
FIRST AID RULES
Contact
with
In the event of problems developing following EYE/SKIN
CONTACT, INHALATION or INGESTION of the treated
the flui
product, please refer to the SAFETY DATA SHEET/AUS32 /
DEF / AD-Blue (ISO22241)
Persons
who
Disconnect the power source, or use a dry insulator to
protect yourself while you move the injured person away
have suffe ed
from any electrical conductor. Avoid touching the injured
electric shock
person with your bare hands until he is far away from
any conductor. Immediately call for help from qualifie
and trained personnel. Do not operate switches with wet
hands.
NOTE
Please refer to the safety data sheet for the fluid
M0312
EN
3