Palazzetti MULTIFIRE NT ARIA Manual De Instalación & Mantenimiento página 21

1 INTRODUCTION
PALAZZETTI heating appliances are built and
tested in accordance with the safety requirements
specified by the relevant European directives.
This manual is intended for owners, installers,
users and maintenance personnel and is an
integral part of the product. If there are any
doubts regarding the contents of this manual,
or for any other explanations please contact the
manufacturer or an authorised service centre,
quoting the paragraph number in question.
No printing, translation and reproduction of this
manual, in part or whole, is allowed without
the permission of PALAZZETTI. The technical
information, illustrations
included in this manual may not be disclosed.
Do not operate the appliance if any of the
instructions provided in the manual are not
understood; if there are any doubts always
contact specialist PALAZZETTI personnel for
explanations.
PALAZZETTI reserves the right to modify the
technical and/or functional specifications of the
stove at any time, without prior notice.
1.1 SYMBOLS
The most important points in this manual are
highlighted by the following symbols:
INSTRUCTION: Instructions concerning correct
stove operation and the responsibilities of operators.
IMPORTANT: This denotes very important
information.
DANGER: This specifies the behaviour required to
prevent accidents or damage to materials.
1.2 INTENDED USE
The product purchased is a stove requiring a casing
for internal domestic heating which it is mainly fed
by the fuel pellets in automatic operation mode
and, if needed , with wood-logs, in semi-automatic
operation mode.
The stove works exclusively with the door closed
and must have a correct electrical supply.
Never open the door while the stove is
operating, except when loading with wood
fuel.
The configurations available are the only ones
permitted by the manufacturer: never use the
stove in any way not described in the instructions
provided.
1.3
1.4 HOW TO KEEP THIS MANUAL
and specifications
1.5 UPDATES TO THE MANUAL
1.6 GENERAL INFORMATION
1.7 MAIN REFERENCE STANDARDS
004776370 - 31/01/2019 - PALAZZETTI - PN - ITALY
PURPOSE AND CONTENTS OF THIS MANUAL
The purpose of this manual is to provide the
fundamental and essential rules for correct
installation, maintenance and use of the product.
Carefully following these rules will ensure a high
level of stove safety and productivity.
Storage and reference
This manual must be kept with care and must be
always available for reference by the user and by
assembly and maintenance personnel.
The installation manual is an integral part of the
stove.
Damage or loss
If required, an additional copy can be ordered from
PALAZZETTI.
Sale of the stove
If the stove is sold the user must also provide the
new owner this manual.
This manual represents the state-of-the-art at the
time the stove was introduced onto the market.
Requesting information
If information is requested from the manufacturer
of the stove, always refer to the serial number
and other identifying data shown on the product's
identification label.
Special maintenance
Special maintenance operations must be carried
out by qualified personnel who are authorised to
work on the model of stove that this manual refers
to.
Responsibility f or i nstallation
accepts no responsibility for the work carried out
to install the stove; such responsibility lies with
the installer, who is required to carry out checks
on the flue and air intake and ensure installation
is completed correctly. Furthermore, all safety
standards required by relevant legislation in force
in the country where the stove is installed must be
complied with.
Use
The stove must only be used in compliance with
the instructions provided in this manual, as well
as with all safety standards required by relevant
legislation in force in the country where the stove
is installed.
A) Directive 2014/35/UE: "Electrical equipment designed
for use within certain voltage limits".
B) Directive 2014/30/UE: "Approximation of the laws
of the Member States relating to electromagnetic
compatibility".
C) Directive 89/391/EEC: "Introduction of measures to
encourage improvements in the safety and health
P ALAZZETTI
21