Seed Shaft Rpm - C5; Hopper Low Level Alarm - C6 - Sola NS PLUS 2311 Manual Del Usuario

ELECTRONICAL CONTROLLER
10.7 SEED SHAFT RPM – C5
Select channel 5 using the central button
40 seconds after the seed shaft stops turning, an alarm beeps 5 times con-
secutively. If it remains still, this alarm will repeat every 30 seconds.
To turn off the beeping, switch off the screen and switch it on again.
This alarm will deactivate under 2 Km/h.
The seed shaft's alarm can be deactivated by pressing the button
for more than 5 seconds on the selected channel. The screen will display "Off".
In this situation the alarm will not be activated even if the screen is switched
off and on again.
10.8 HOPPER LOW LEVEL ALARM – C6
When the seed level is below the sensor, an alarm is activated and beeps 5
times consecutively. In this case the screen will display «ALA».
Activate and deactivate hopper level alarm
1. Select channel 6 using the central button
2. Press and hold
3. Press the central button to select "0" (alarm is off ) or "1" (alarm is on).
4. Release the buttons to change back to the normal position.
OPTIONAL:
Total sowing shut-off.
Press the left hand
seed drill are in motion. The screen will display the indicating arrow.
Press left
Shut-off sowing from folding parts.
Press the right
The screen will display the indicating arrow.
Press right
button and...
to lock the seed's exit even when the wheels of the
again to return to a normal working position.
to lock the exit part of the arms on the folding parts.
again to change back to normal position.
72
.
.