Tabla de contenido
ELECTRONICAL CONTROLLER
Programming the working width
1. Select channel 2 of the area.
2. Press and hold
for more than 5 seconds until the width value is
displayed and, without releasing it, press the central button to modify the
flickering digit.
3. Press and hold the flickering digit for more than 5 seconds to modify its
value.
4. Release all buttons to return to the normal state.
Working in micro mode
When working with the distributor in the micro-dosing
mode (for small hoppers and minimal doses), press and hold
button
for more than 3 seconds until the arrow indicating the micro mode is displa-
yed. In this situation, the monitor will keep the speed and actual real working
area.
Press and hold
for more than 5 seconds until the indicating arrow
disappears to resume normal position.
62
Tabla de contenido
