10. ELECTRONICAL CONTROLLER
10.1 FRONT PANEL DESCRIPTION.
Shut-off sowing from
folding parts
Total sowing
shut-off
Microdosing
Total shut-off controller
Area total 1 and 2
programming
The monitor provided comes programmed especially for your model of seed
drill. The user will only need to observe the displayed values and no extra
programming is required.
The monitor shows 6 different channels or readings, as well as 3 different
arrows showing the states.
C1 shows forward speed in m/sec.
C2 shows two different hectares (for example on partial and one total hectare).
C3 not in use.
C4 shows the fan's rpm.
C5 shows the turning speed of the distributor's axle's in rpm.
C6 shows if the hopper's seed level is too low.
NEUMASEM
C1 C2
C4 C5 C6
0/1
Ha
0
Central button
Channel selector
Value and digit selector
ELECTRONICAL CONTROLLER
Screen
Selected channel
(channel 3 not in use.
Folding parts shut-off
controller
Auto-calibration programming
Zero setting areas
59
Fig. 76
Fig. 76