Corvette 1984-1989 - Dynex DX-G1113 Guia Del Usuario

Installing your car stereo
Chevrolet

Corvette 1984-1989

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the seven screws from the dash trim bezel.
3 Move the gear shift to the lowest position.
4 Pull the right edge of the bezel forward, unclip the left side, the remove the bezel.
5 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
6 Go to "Completing the installation" on page 76.
2
S10 shown
as example
39