24
Chevrolet
Astro 1990-1995
GMC
Safari 1990-1995
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two screws from the bottom of the dash trim bezel. Carefully unclip the
bezel, then remove it. Remove the four screws from the factory head unit, then
disconnect the wiring.
3 Cut and remove all mounting tabs on bracket 1 except the A tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
4 Go to "Completing the installation" on page 76.
Installing your car stereo
A