36
Chevrolet
Celebrity 1982-1983
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the plastic plate next to each A/C vent, then remove the two exposed screws.
3 Remove the four screws on the steering column.
4 Push in on the light control knob spring, then remove the knob.
5 Remove the bezel.
6 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
7 Go to "Completing the installation" on page 76.
2
S10 shown
as example
Installing your car stereo