Technical Data - Kathrein UFOmini 87 Manual Del Usuario

Configuring
1. Install and start the USW 800 configuration software on the computer.
2. Configure all the head-end parameters as required. In this case:
– The USW 800 will communicate with the master and detect the slave automatically.
– The current version of the USW 800 and the user guide are available free of charge at www.kathrein.com.

Technical data

Inputs
Sat-IF input
Terrestrial/cable input
Decoupling
Return loss
Permissible level difference
DiSEqC 1.0
TM
Switching levels
Remote feed current for LNB
Remote feed current for active antenna (5 V) mA
Frontend
DVB-S/-S(2)/-T/-T(2)/-C
Frequency grid
Input level range
Permissible level difference
Demodulation DVB-S
Standard
Frequency range
Input symbol rate QPSK
Code rate (Viterbi)
Roll off
AFC regulation range
Demodulation DVB-S(2)
Standard
Input symbol rate QPSK
Code rate (LDPC)
Input symbol rate 8PSK
Code rate (LDPC)
Roll off
6 / 8
dB
dB
dB
vert./horiz., low/high; sat. pos. (A/B/C/D)
V/kHz
mA
max. 60 (at F socket nos. 1, 2, 4)
MHz
dBµV
dB
MHz
MS/s
%
MHz
MS/s
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
MS/s
%
4 x F connectors, 75 Ω
1 x F connectors, 75 Ω
> 25
typ. 8
max. 12 (an inputs 1, 2, 3, 4)
14/18, 0/22
max. 250 (at F socket no. 3),
100 (at F socket no. 5)
8 x
1
60 ... 100
20
EN 300 421
950 ... 2150
1 ... 45
1/2, 2/3, 3/4, 5/6, 7/8
35
± 5
EN 302 307, TR 102-376
1 ... 45
1 ... 45
3/5, 2/3, 3/4, 5/6, 8/9, 9/10
20/25/35