Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SmarTemp Control
Status Indicator Lights - The Red status indicators (heater "ON") and LCD screen backlight turn off
after 30 seconds. A touch of any button or a turn of the rotary knob will re-activate these lights. If the
"Webasto" button is used to re-activate these lights, an additional press of this button is necessary to
turn the heater off. Note that when the heater is "ON" the display is active.
Technical Information:
– Rated Voltage: 12V / 24V
– Operating Voltage Range: 9V - 32V
– Low Voltage Disconnect Range: 12V: 11 – 12.5V | 24V: 21 – 25.5V
– Operating Temperature: - 40° ... +185 °F (- 40° ... +85 °C)
Note: Display visible to -22°F (-30°C)
– Set Temperature Range: 41° - 95° F (5° - 35° C)
– Installation Dimensions: (L x H x D) 2.7" x 2.2" x .60" (69.4mm x 55.5mm x 15.2mm)
Drilling Dimensions
Use the dimensions / template located in the back of this manual as a guide when installing and
mounting the Webasto SmarTemp Control 2.0.
NOTE: The Webasto SmarTemp Control 2.0 has an integrated ambient temperature sensor. To
ensure this sensor properly measures the surrounding air, the unit must only be mounted in the
vertical position.
Installation - Operating Instructions
8
Tabla de contenido
