Troubleshooting - Dri-Eaz DefendAir HEPA 500 El Manual Del Propietario

TROUBLESHOOTING

PROBLEM
Unit does not operate
Change light illuminated
For any problems not described here, please contact your local distributor for assistance.
SPECIFICATIONS
Model HEPA 500 (F284-115V)
Weight 44 lbs. | 19.9 kg
Dimensions 24.6 × 26.2 × 18.2 in.
(D × W × H) 62.5 × 66.5 × 46.2 cm
Duct sizes Intake: 12 in. Outlet: 8 in.
Power 3A, 115V, 60 Hz
Air movement 250–500 CFM
Filter system Up to two prefilters and one HEPA filter.
Controls On/Off switch, variable speed control knob
Power cord length 25 ft. | 7.63 m
Construction Rotomolded polyethylene housing
Safety UL/cUL listed
Specifications are subject to change without notice. Some values
may be approximate.
07-01489E F284-115V
CAUSE
1. No power to machine
2. Switch not turned on
3. No power at supply outlet
4. GFCI tripped
1. Primary (HEPA) filter is full
2. Air intake restricted by ducting
bends, kinks, or excessive
length
SOLUTION
1. Plug in the unit; check power at outlet
2. Turn on the switch
3. Reset supply circuit breaker/GFCI
4. Reset unit circuit breaker/GFCI
1. Replace the HEPA filter
2. Eliminate bends/kinks in ducting; reduce ducting
length.
6 Dri-Eaz Products, Inc.