juju Baby Boo Manual Del Usuario página 10

direction to tighten the lap belt. Check to make sure the tongue plate is locked by
pulling on the belt(Fig. 3.2).
Step 3. Place the diagonal belt in the diagonal belt guide at the back of the seat(Fig.
3.3)
Step 4. Tighten the vehicle`s own 3-point
positions showed in fig. 3.3 and fig.3. 4.
Step5. The satisfactory position of the adult safety-belt buckle car seat relative to
the child is as the Fig 3.5.
You can contact the child car seat manufacturer if in doubt about this point.
Make sure all the belts` position is right and they have not become twisted. Also
check that the cover is not impeding the movement or fit of the belt webbing in any
way.
To release your baby car seat follow the above instructions in reverse order.
SNAPPED THE HANDLE
seatbelt by pulling hard on the
The handle for the baby car seat can be
snapped into 4 stable positions. To adjust
the handle, please press the red button of
handle on both sides at the same time.
Now it can be rotated.
Page 10