Ingersoll Rand 551 Serie Especificaciones Del Producto página 4

EN
Forward/Reverse Operation
These Drills are capable of operating in a Forward/Reverse or Forward Only mode of operation. Make the mode selection prior to starting the
tool. Look at the arrows on the Throttle Sleeve. These arrows indicate the direction in which the Throttle Sleeve must be rotated to activate
either forward or reverse rotation of the Drill.
Hold the Drill in the normal operating position with the Throttle Sleeve pointing towards the operator's right hand. With the Throttle Sleeve in
the operator's right hand, pivot the Reverse Stop Lever away from the operator. With the Reverse Stop Lever in this position, the Drill can be
operated in either the forward (clockwise) rotation mode or reverse (counterclockwise) rotation mode.
WARNING
Inadvertent movement of the Throttle Sleeve could cause a sudden change in the direction of rotation of the Drill.
Pivoting the Reverse Stop Lever toward the operator prevents the reverse rotation of the Drill and permits the Drill to be operated in the
forward rotation mode only.
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that
they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
EN-2 03524410_ed12