Amann Girrbach ceramill argotherm 2 Modo De Empleo página 56

A P P L I C A T I O N A N D O P E R A T I O N
▷ Lightly turn and move down the sintering cover,
working away any pearls seated in the closing
E N
path.
Fig. 28
The sintering cover must be positioned as
deeply as possible in the sintering bowl. The
handle in the cover may not protrude signifi-
cantly over the rim of the bowl. When the cover
is seated too high, the sintering result can be
affected (increased oxidation).
Fig. 29
56
NOTE:
Tilting off or falling down of the sintering bowl,
due to its high weight.
▷ Apply bowl/cover tongs ensuring a firm and
good grip.
▷ Pick up the sintering bowl with the bowl/cover
tongs.
Fig. 30
NOTE:
Possible damage to the furnace.
▷ Avoid contact with the heating rods, thermoe-
lement and insulation material!