D-Link DWR-2101 Guía De Instalación Rápida página 4

Figure 4: Top Connector
# Connector
Type-C
Port to connect a Type-C USB cable
1
Port for PC connections or for charging.
Table 3: Interface Description
Installation
Nano SIM Card Installation
Note: The DWR-2101 is only compatible with
Nano SIM cards.
1. Make sure the DWR-2101 is powered off.
Figure 4: Lifting the Back Cover
2. Remove the battery cover on the back of
the device by gently prying it up from the
case using the corner notch.
2
1
Description
3. Insert the Nano SIM card into the Nano
SIM card slot, following the orientation
diagram next to the slot for proper
positioning.
4.
Replace the back cover. Ensure that the
back cover is aligned correctly.
5. Press and hold the power button for three
seconds to turn on the device.
Charging
1. Connect the Type-C USB cable to the
power connector on the top of the
DWR-2101.
2. Connect the other end of the Type-C USB
cable to your computer, or connect it to a
Type-C 5 V / 2 A power adapter to charge
your device.
EZ-Five App Configuration
1. Download the free EZ-Five app from the
App Store or Google Play by searching for
EZ-Five or by scanning the QR code below.
2. Open the EZ-Five app to configure your
device.