RIB J Serie Manual Del Usuario página 20

G
CONTROL AND SAFETY ACCESSORIES
B
FLAT STRONG BOX
Safety box preventing the access to controlling devices.
Supplied as a standard, with toggle switch (open-close) and electric brake release system.
Of die-cast aluminium - IP54.
FLAT SURFACE MOUNTED PUSH BUTTON
OPEN/CLOSE
Control for any type of automation.
It is equipped with two microswitches with contacts 15A 250V.
Dim.: 59,5x82,5x29
KEY SELECTORS
Control for any type of automation.
Equipped with two microswitches with N.O. contacts of 15A 250V (Open/Close) and one
switch with N.C. contact of 4A 250V (Stop).
The selector can be opened only with the operating key.
IP54
- EMBEDDED dim.: 100x100x109
- TO WALL dim.: 100x100x42
STONE STRONG BOX
Safety box preventing the access to controlling devices.
Supplied as a standard, with toggle switch (open-close) and electric brake release system,
code ACJ9071 in the versions.
Of die-cast aluminium - IP54.
FIT SLIM EN12978 - EN13849-2
PHOTOCELLS for the wall-installation
PAIR OF COLUMNS FOR FIT SLIM
FIT SLIM photocells have synchronism function in AC current and ranges of 20 m.
code ACG2012
You can fit many photocell couples close together thanks to the optional synchronizing
circuit SYNCRO TRANSMITTER TX SLIM SYNCRO code ACG8029 for more than 2
photocells couples (up to 4).
SPARK
In order to make the systems mentioned above give the best performances, you need
to install an antenna tuned on the frequency of the radio receiver installed. N.B. Pay
attention to not let the central wire of the cable to came Into contact with the
code ACG1010
external copper sheath, since this would prevent the antenna from working.
code ACG1030
Install the antenna vertically and in such a way the remote control can reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
LATERAL SUPPORT
SPARK ANTENNA 433
RADIO TRANSMITTER SUN
SUN 2CH
SUN CLONE 2CH
20
code ACG6052 SUN 4CH
code ACG6056 SUN CLONE 4CH
code ACJ9078
code ACG8032
code ACG8065
code ACG7059
code ACG7042
code ACG5452
code ACG6054
code ACG6058