Led Indicators; Installation Steps - Ovislink Air Live WL-5470AP Manual Del Usuario

LED Indicators

LED
Indicator Color
Power Green
WAN Green
Wireless Green
LAN
Green
1~LAN4

Installation Steps

1. Please install your network cards first before the AP device
2. Screw-in the antenna (clockwise) into the Antenna connector
3. Connect the power and LAN cable to the back
4. Use your wireless card to do a site survey, the default SSID is
airlive and Channel is 13
5. If you need to change AP's configuration, please follow the
procedure below:
■ The AP's default IP address is 192.168.100.252. Please
make sure your computer IP is in the same subnet as the AP
(i.e. 192.168.100.x)
■ Open the web browser and enter http://192.168.100.252/.
Wireless Access Point
WL-5470AP
Solid
Turns solid yellow when device is
booting, after boot successfully, the
light turns Green.
Turns solid yellow when connect
with 10Mbps / Green with 100Mbps
speed Ethernet client.
Turns solid green after booting is
successful
Turns solid yellow when connect
with 10Mbps / Green with 100Mbps
speed Ethernet client.
Status
Flashing
Receiving/
Sending data
Receiving/
Sending data
Receiving/
Sending data
English
4
4