Ovislink Air Live WL-5470AP Manual Del Usuario página 4

Important Information
The AP features 5 LAN ports and one of LAN port behave as a WAN port
when setup the Gateway mode to use.
TX output power is limited to 20dBm (EU)
23dBm (FCC) , up to 25dBm (South America)
The AP mode's default IP address is 192.168.100.252
The default Subnet Mask is 255.255.255.0
The default SSID is airlive
The default Channel is 13
The default login username is admin and no needed to enter the
password, you can change the password in the Web configuration page
In AP, Client, Bridge, and Repeater mode, the default DHCP Server is
disabled. Please set your PC's IP address to the same subnet as the
AP to access the AP.
In WISP mode and WISP+Universal mode, the DHCP server is
enabled. Please restart your PC to renew the IP address.
Support of 8 modes of wireless functions :
AP, Client, Bridge, WDS Repeater, Universal Repeater,
WISP(Client Router), WISP + Universal Repeater
and Gateway (Broadband Router) mode
Note: If you setup the wireless mode and push the setup button, but
can't pop-up window, please disable the pop-up block function
of the Yahoo or Google toolbar to allow pop-up window on your
browser.
GPL Compliance: Part of the device's firmware use GPL licensed
code. There is no warranty for the GPL software. You can get a copy
of the GPL source code from our website at
http://www.airlive.com/gpl.htm.
Wireless Access Point
WL-5470AP
English
3
3