Led Indicators - Ovislink Air Live WLA-5000APv2 Manual Del Usuario

Important Information
The Client mode's default IP
is 192.168.1.2 (Default mode)
The AP+WDS and WISP Client
Router mode's default IP address
is 192.168.1.1
The default Subnet Mask
is 255.255.255.0
The default password is airlive
The default SSID is airlive
The default DHCP client is
Disabled

LED Indicators

LED
Indicator Meaning
Power
LAN
Wireless
Ports and Connectors
Reset: Press 10 seconds to
restore settings to factory default
LAN: Connect your PC, Switch,
or Router here.
Power: Connect the included
Power adapter here.
Antenna: Install Antenna Here
802.11 a/b/g Wireless AP
WLA-5000AP v2
Solid
Turns solid green when power
is ON
LAN Connection is detected.
Wireless Connection is made
The default is set to Client mode
firmware
If You need to change the firmware to
use the AP+WDS Mode.or WISP Client
Router mode, The related firmware is in
the supplied CD ROM's Firmware
directory.
The WDS and Repeater mode
does not work in Turbo mode. When
using those Mode, please do not
select Super A or Super G modes.
Status
Flashing
N/A.
Receiving/
Sending data
Receiving/
Sending data
Antenna
Connector
Antenna
Connector
English
1
1