Snooze Function; Sleep Operation; Radio Mode - Denver Electronics CR-918 Instrucciones De Uso

- When the alarm 1 or 2 rings, to turn it OFF press on the AL.1 / AL.2
button (6/7). Alarm 1 / 2 will ring again at the same time the next
days.
- To stop completely Alarm 1 / 2 the following days, press & hold AL.1
/ AL.2 button (6/7) for 3 seconds in standby mode, the alarm 1 / 2
icon will disappear and Alarm 1 / 2 will be disabled for the next
days.
- To resume Alarm 1 / 2, press & hold AL.1 / AL.2 button (6/7) again
for 3 seconds in standby mode.

SNOOZE FUNCTION

When the alarm rings, press SNOOZE button (3) to suspend the alarm
& to activate the snooze function, Alarm will stop & will ring again 9
minutes later. Press SNOOZE key again, alarm will be suspended
again, another 9 minutes later the alarm will ring again and so on until
the next alarm rings.
Note: The Snooze interval time is 9 minutes.
- To turn the Snooze function off, press once on AL.1 / AL.2 button
(6/7).
- Press and hold the AL.1 / AL.2 button (6/7). The alarm icon will
disappear to indicate the alarm is disabled.

SLEEP OPERATION

When listening to radio, press Snooze / SLEEP button (3) to enter
sleep mode. You can just adjust the sleep timer from 90 mins to
10 mins by pressing the Snooze / SLEEP button (3). The unit will
automatically turn off after the selected time.

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and
extended to have the best FM reception.
1. Press the ON/OFF button (4) to turn the unit ON.
2. Use the Tune (5) or Tune (1) button to select the desired FM
radio station. If you press and hold the Tune or Tune button
for 3 seconds, then release, the unit will automatically scan to the
next broadcasting station.
3. Press the ON/OFF button (4) to turn the radio OFF.
ENG-3