Resetting The Equipment; Engineer Mode; Cleaning And Maintenance - Bremshey Sport RN2 Manual De Instrucciones

EN
Pausing the program
1. Press the START/STOP button to pause the program.
2. Press the START/STOP button again to continue the program.

Resetting the equipment

If you reset the equipment, the console returns to the main menu. The equipment can
be reset in two ways.
1. During a workout: Press and hold the START/STOP button for 3 seconds.
2. At any moment: Remove the safety key from the console.

Engineer mode

1. To enter the engineer mode, press the MODE button and the SPEED + button.
To return to the user mode, press the START/STOP button and the SPEED +
button. The display shows the software version.
2. Press the ENTER button. The display shows the roller diameter.
3. Press the ENTER button to confirm. The display shows the LDU version.
4. Press the ENTER button to confirm. The display shows the ISP version.
5. Press the ENTER button to confirm.
6. Press the ENTER button to confirm. The display shows the total time for the
workout.
7. Press the +/- buttons to select kilometres (km) or miles (ml). Press the ENTER
button to confirm. The display shows the total distance for the workout.
8. Press the ENTER button to confirm. The display shows the total time for the
workout.
9. Press the ENTER button to return to the program menu.

Cleaning and maintenance

WARNING
– Before cleaning and maintenance, remove the mains plug from the
wall socket.
– Do not use solvents to clean the equipment.
▪ Do not block the ventilation openings. Keep the ventilation openings clear from
dust, dirt and other obstructions.
▪ Clean the equipment with a soft, absorbent cloth after each use.
24 RN2