Invacare HomeFill HF2RE9 Manual Del Usuario página 19

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE
The fillport cover on the connector fillport and the cylinder fillport
MUST be replaced after filling and whenever not in use. If either of
the fillport covers are missing contact your dealer/Home Care
equipment provider before using.
6.
Place the fillport covers onto the connector fillport and cylinder
fillport (FIGURE 4.6).
Cylinder Fillport Cover
7.
Examine the cylinder gauge to ensure cylinder is full (needle pointing
into GREEN area). If the cylinder is not full, perform the following:
Repeat STEPS 1-8 of Connecting the Cylinder to the Compressor
on page 15.
If cylinder is not full after second attempt at filling, DO NOT use
the cylinder and contact your dealer/Home Care equipment
provider.
8.
For models HF2RE9ES only - Turn cylinder valve to the off position
when not in use (FIGURE 4.7).
Regulator
Assembly
Cylinder
Valve
Part No 1167426
WARNING
FIGURE 4.6 Fillport Covers
FIGURE 4.7 Closing Cylinder Valve
Connector Fillport Cover
19
NOTE: Turn
valve clockwise
to close.
HomeFill
®
Tabla de contenido
loading

Este manual también es adecuado para:

Homefill hf2re9es

Tabla de contenido