Testing The Connection; Controlling The Ultrasound System - SonoSite SonoRemote Control Guia Del Usuario

5 Simultaneously press
remote control until the beep, and then
release.
The Bluetooth indicator blinks slowly.
6 Select Search in the lower lefthand corner of
the ultrasound system screen.
The ultrasound system searches for Bluetooth
devices. The process can take several minutes.
7 Select the remote control (BlueHID ##:##) in
the Bluetooth Devices list, and then select
Connect at the bottom of the screen.
In the Bluetooth Devices list, the remote
control's status changes to Connected.
Note: The USB Devices setup page lists both the
remote control (KBD) and the Bluetooth USB adapter
(BTD).
To disconnect the remote control
1 On the ultrasound system's USB Devices
setup page, select Bluetooth. (See "To display
the USB Devices setup page.")
2 Select the remote control (BlueHID ##:##) in
the Bluetooth Devices list, and then select
Disconnect at the bottom of the screen.
To display the USB Devices setup page
Do one of the following:
• (M‐Turbo) Press the
select USB Devices.
• (S Series) In 2D imaging, click Setup on
the vertical row of control keys, and then
click USB Devices.
If Setup is on another page, press Page x/x
until it appears.

Testing the connection

Before the ultrasound procedure, test the
connection to confirm that the correct system is
connected.
and on the
key, and then
SETUP
To test the connection
Press a button on the remote control.
The ultrasound system is connected if it
responds as expected.
Controlling the ultrasound
system
WARNING: If the ultrasound system fails to respond
to the remote control during an
ultrasound procedure, use the controls
on the ultrasound system instead.
If a message that requires a user
response appears on-screen, use the
controls on the ultrasound system to
respond.
After connecting the remote control, you can
control the ultrasound system by pressing the six
buttons or using six voice commands.
Buttons
The buttons on the remote control perform the
following commands.
Decreases the depth
Increases the depth
Increases the gain (live image)
Reviews the cine buffer (frozen image)
Decreases the gain (live image)
Reviews the cine buffer (frozen image)
Freezes (or unfreezes) the image
Saves the image
See also "Reviewing the cine buffer" on page 7.
You can press the buttons to control the
ultrasound system even if the microphone is
connected.
5