Machine Description; Chapter 2. Machine Installation; Environmental Conditions - Minipack-Torre Plexi 30 Instrucciones Para La Instalación, Uso Y Mantenimento

Chapter 1. Description

1.3. Machine description

"Plexi" is an automatic horizontal envelope machine.
It may be used by inserting the magazines manually or by using the loaders which may be properly synchronised.
1 Main switch
2 Plug for interfacing with upstream devices
3 Electric supply cable
4 Control panel
5 Film reel area
6 Potentiometer to change the envelope length
7 Transversal welding area cover

Chapter 2. Machine installation

2.1. Transportation and positioning
It is recommended to handle with great care during transport and positioning!
Use protection gloves while handling the machine.
To lift the machine, use a lift truck having an adeguate capacity (make sure the machine is properly balanced and pay
attention to the screws protruding from the lower part of the body). As an alternative provide for slinging and use a hoist
complete with ropes which are properly dimensioned and equipped with hooks at their end.
The machine is supplied with fixed feet. Never use the machine if it is arranged on wheels (its movement might alter ist
good operation).

2.2. Environmental conditions

Place the machine level on the floor in a suitable environment free from humidity, gases, explosives, combustible

materials. The machine may only be installed on smooth, flat non-inflammable surfaces.
Leave a minimum space of 0,5m around the machine so that not to obstruct air inlets.

Working environment conditions:
Temperature from + 5°C to + 40°C

Relative humidity from 30% to 90%, without condensation

The lighting of the operation room shall comply with the laws in force in the country where the machine is installed.
However, it shall be uniform and allow good visibility in order to safeguard the operator's safety and health.
MACHINE PROTECTION FACTOR = IP20
THE AIRBORNE NOISE MADE BY THE MACHINE IS LOWER THAN 70 dB(A)
8 Feet supporting adjustable side guides and relative lock
knobs
10 Magazines loading area
11 Auxiliary plug
12 Auxiliary plug controlled for optional devices
(electrostatic sealer)
13 Packed parcels unloading area
14 Compressed air connection
M Manometer.
15
EN
EN