Package Contents; Hardware Installation - D-Link DCS-910 Guía De Instalación Rápida

Quick Installation Guide
DCS-910
DCS-920

Package Contents

If any of the items are missing, please contact your retailer.
DCS-910 or CD-ROM
with
920 Internet
manual
camera
and
software

Hardware Installation

Connect the Wireless Antenna (DCS-920 only)
Screw the Wireless antenna onto the Internet camera's antenna
connector.
Connect the Ethernet Cable
Connect the Ethernet cable to the Internet camera's Ethernet port
and attach the other end of the cable to the network.
Note: This step is necessary to configure DCS-920.
Attach the Power Adapter
Attach the power adapter to the Internet camera's power socket and
connect it to a power outlet.
The camera's LED will light red when it receives power.
The LED will light green after the camera connects to the network.
The LED will flash green while accessing the camera.
Please refer to the Manual on the CD to install the software utility
and finish installation.
10/100 Fast Ethernet Internet Camera
Wireless G Internet Camera
Category 5
Ethernet cable
1
Power Camera
adapter stand
Wireless
antenna
(DCS-920
only)