Tabla de contenido
®
R&S
ZN-Z15
● The R&S ZNB/ZNBT must be equipped with the Device Control option
"B12".
To establish a Direct Contol connection, the analyzer has to be switched
off. Otherwise the R&S ZN-Z15 is not properly detected.
● The 5V output of "Direct Control OUT" is limited to 150 mA.
● The VNA firmware only supports a single RFFE interface (external or
internal) per R&S ZNB/ZNBT.
A suitable connection cable is provided with option R&S ZN-B121 (order no.
1323.9290.00).
2.3.3
USB
Currently not supported.
2.3.4
LAN
Currently not supported.
User Manual 1177.5479.02 ─ 02
Putting the Instrument into Operation
Connecting External Devices
14
Tabla de contenido
