Tabla de contenido
®
R&S
ZN-Z15
2.2
Preparing the Instrument
This section covers the basic steps to set up the external RFFE interface and to
put it into operation.
Safety precautions
Be absolutely sure to follow the instructions in the sections below to prevent
injury to people or damage to the instrument. This is particularly important
the first time that you use the instrument. In addition, be sure to observe the
general safety notes at the beginning of this manual.
2.2.1
Unpacking the Instrument
The external RFFE interface together with its accessories (external DC power
supply, USB cable, RFFE/GPIO interface cable and adaptors, product documen-
tation) is delivered in a cardboard box.
Proceed as follows to unpack its contents:
1. Open the cardboard box and remove the R&S ZN-Z15 from its foam slider box
and PE flat bag
2. Check the shipment for completeness by comparing it with the shipping docu-
ment and the accessory lists for the various items.
3. Check the R&S ZN-Z15 for any damage. If there is any damage, immediately
contact the shipping company that delivered the instrument. If this case, be
absolutely certain that you keep the cardboard box and packing materials.
Packing materials
We recommend that you retain the packaging. It is advisable to keep the
original packing material in order to prevent control elements and connec-
tors from being damaged if the instrument has to be transported or shipped
at a later date.
User Manual 1177.5479.02 ─ 02
Putting the Instrument into Operation
Preparing the Instrument
10
Tabla de contenido
