Samsung RF4287HA Manual De Usuario página 13

Ocultar thumbs Ver también para RF4287HA:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

( 3 ) Alarm /
( 3 ) Alarm /
The Alarm/Hold 3 sec for Filter Reset button
serves two purposes:
hold 3
hold 3
- To turn the door open alarm on and off
sec for
sec for
- To reset the water fi lter life indicator.
Filter
Filter
1) Door Alarm Function
Reset
Reset
(Filter Reset)
(Filter Reset)
(Blue)
(Blue)
(Red)
(Red)
2) Water Filter Life Indicator Function
Some areas have large amounts of lime in
their water, which causes the water fi lter to
clog more quickly. If this is the case in your
area, you will have to change the fi lter more
frequently than every six months.
Pressing the Lighting button turns on the
( 4 ) Lighting
( 4 ) Lighting
Dispenser LED lamp (under the display)
in continuous mode so that it stays on
continuously. The button also lights up. If you
want the Dispenser lamp to come on only
when some one uses the dispenser, press
the Lighting button to turn the continuous
mode off.
The Power Cool function substantially
( 5 ) Power
( 5 ) Power
speeds up the refrigerator compressor,
Cool
Cool
causing the refrigerator to cool down rapidly
to a temperature you choose. When you
press the Power Cool button, the Power
Cool icon lights up.
Power Cool is useful if you need to quickly
cool items or need to cool the refrigerator
rapidly if it has warmed dramatically (for
example, if the door was left open).
To turn off Power Cool, press the Power
Cool button again. Power Cool turns off
automatically after 2 1/2 hours to decrease
energy consumption.
DA68-01922A.indb 13
DA68-01922A.indb 13
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes.
The beeping stops when you close the
door. The door alarm function is pre-set
to On in the factory. You can turn it off by
pressing and then releasing the Alarm/
Hold button. You can turn it back on
in the same fashion. The icon lights up
when the function is on.
After you replace the water fi lter, press
and hold the Alarm/Hold 3 sec for Filter
Reset button to re-set the water fi lter life
indicator. When you re-set the water fi lter
life indicator, the Filter icon on the panel
turns blue, green, or yellow.
The Filter icon will turn red to let you
know it is time to change the water fi lter
after six months (about 300 gallons).
When you turn on Power Cool,
the refrigerator's compressor
speeds up and is louder than
during normal operation.
( 6 ) Ice Off
( 6 ) Ice Off
If you don't want to make more ice, press the
(Hold 3
(Hold 3
Ice Off button. Pressing this button 3 second
sec for
sec for
locks the display panel and dispenser
child lock)
child lock)
buttons so the buttons can not be used.The
Child Lock icon lights up to indicate you've
activated the Child Lock function.
(7) Cubed Ice
(7) Cubed Ice
Press the Cubed Ice or Crushed Ice button
to select the type of ice you want dispensed.
(8) Crushed
(8) Crushed
Each time you press the button, the cubed
Ice
Ice
and crushed ice modes alternate and
the Cubed or Crushed ice icon lights up,
indicating your selection.
If you don't need ice, turn the function off to
(Cubed)
(Cubed)
(Crushed)
(Crushed)
save on water and energy consumption (See
Ice Off below).
Cooling Off mode (also called Shop mode),
Cooling Off
Cooling Off
is designed for use by retailers when they
Mode
Mode
are displaying refrigerators on the shop
fl oor. In Cooling Off mode, the refrigerator's
fan motor and lights work normally, but the
compressors do not run, and the refrigerator
and freezer do not get cold.
To start Cooling Off mode, press and hold
the Energy Saver button and the Power
Freeze button for 3 seconds during normal
operation. The refrigerator chime sounds and
the temperature display fl ashes OF OF.
To cancel Cooling Off mode, press and hold
the Energy Saver and the Power Freeze
buttons again for 3 seconds.
If you don't want to make more ice, press
( 9 ) Ice Off
( 9 ) Ice Off
the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you stop ice making if
the following occur:
-
There is enough ice in the ice bucket.
-
You want to save water and energy.
-
Water is not being supplied to the
refrigerator.
If the ice maker function is ON, and the water
line is not connected, there will be a water
valve noise from back of the unit. Press the
Ice Off ( 6 ) button until the Ice Off indicator (
) illuminates.
operating _13
2013.3.4 1:32:47 PM
2013.3.4 1:32:47 PM
Tabla de contenido
loading

Tabla de contenido